Skip to main content

Nuclear Power

Nuclear Power

Since 1988, BTI has been actively involved with the nuclear power industry, providing radiation detection equipment and services to facilities worldwide. From safety and security applications to research and development, BTI has a range of technologies to meet the diverse needs of nuclear generating and waste handling sites. BTI also offers laboratory services for radiological sample analysis and provides expert consulting services for decommissioning and waste management projects. Please select a product/service below or contact us for more information.

Rad Compass


The RadCompass is a unique instrument, offering a compact, easy-to-use, low cost solution for radioactive source localization. This directional survey meter displays both gamma dose rate and 360º directional information and is an ideal tool for first-responders, military personnel, and industrial radiation surveyors.

Learn more



BTI’s MICROSPEC-6™ is a powerful, portable spectroscopic survey system for the detection, identification, and measurement of ionizing radiation.

Learn more

Mobile Microspec

Mobile Microspec

Bubble Technology Industries has developed a spectroscopic mobile system that can be easily mounted on any vehicle platform. This system (called the “MOBILE MICROSPEC”) is ideally suited for mobile platforms.

Learn more

Neutron probe

Microspec Neutron Probe

Bubble Technology Industries N-PROBE is a revolutionary portable neutron scintillation spectrometer, designed to be used by non-specialists for measurement of low-intensity neutron doses in the mixed field environments often found in nuclear utilities, fuel storage areas, fuel and waste processing operations and military applications.

Learn more

G Probe

Microspec Gamma Probes

In the MICROSPEC system, NaI response functions and efficiencies are stored in the on-board computer. The acquired spectrum is stripped and used to calculate dose equivalent using internationally accepted energy-dose conversion coefficients. The result is a NaI-based system that provides highly accurate, energy-independent, tissue equivalent dose.

Learn more

X-Ray Probe

Microspec X-Ray Probe

The MICROSPEC X-Ray Probe was developed to perform spectral and dose-equivalent measurements for low-energy photons for assessment of radiological hazards for the skin Hp(0.07) and eye Hp(3). The MICROSPEC X-Ray Probe uses a thin NaI crystal, which has low detection efficiency for high-energy gamma rays and high detection efficiency for low-energy gamma rays.

Learn more

Beta Probe

Microspec Beta Probe

Bubble Technology Industries’ MICROSPEC systems were the first truly portable spectroscopic instruments providing the two essential pieces of information required by health physicists – dose rate and radionuclide identification. In addition to an extensive line of photon probes, BTI offers the only commercially available portable beta spectrometer, the B-PROBE™.

Learn more

SSS Probe

ROSPEC SSS Probe – Simple Scintillation Spectrometer

The Simple Scintillation Spectrometer (SSS) is a research neutron spectrometer intended to complement the range of ROSPECTM by allowing measurements from 4 to 16 MeV.

Learn more

Calibration Caps

MICROSPEC Calibration Caps

MICROSPEC calibration caps are used for automatic energy calibration in BTI’s MOBILE MICROSPEC and MICROSPEC-6 spectroscopic probe systems. An appropriate cap must be purchased separately for each probe purchased.

Learn more


ROSPEC – Rotating Neutron Spectrometer

ROSPEC is a user friendly, unique rotating neutron spectrometer designed specifically for the spectral measurement of degraded fission neutrons, which may be encountered in nuclear power and fuel processing plants, weapons-related military facilities and accelerator laboratories. ROSPEC is intended for use by non-specialists for the characterization of neutron fields that pose a health threat.

Learn more


FNS 100 – Fast Neutron Spectrometer 100

The BTI FNS-100 is a high efficiency, high resolution fast neutron spectrometer. The detector is a multi-wire He-3 ion chamber with a dense quenching gas. The availability of both high efficiency and exceptional resolution in one instrument makes the FNS-100 useful for nuclear science and engineering, materials research and radiation protection.

Learn more


BD-PND – Personal Neutron Dosimeter

Bubble Detectors are the most sensitive, accurate, neutron dosimeters available. Used for over 15 years by nuclear facilities, research institutes, military personnel, and the medical community, Bubble Detectors provide instant visible detection and measurement of neutron dose. The BD-PND is the recommended detector for personal neutron dosimetry.

Learn more


BDT – Bubble Detector Thermal

The Bubble Detector is the only neutron dosimeter where the response is independent of dose rate and energy, with zero sensitivity to gamma radiation. Health physicists and others who are especially concerned with thermal neutron dose can take advantage of the simplicity and low cost of thermal Bubble Detectors. The BDT Bubble Detector is preferentially sensitive to thermalized neutrons, with an exclusion ratio of thermal-to-fast neutron response exceeding 10:1.

Learn more


BDS – Bubble Detector Spectrometer

Bubble Detectors are the most sensitive, accurate, neutron dosimeters available. Used for over 15 years by nuclear facilities, research institutes, military personnel, and the medical community. The BDS is a complete low-cost neutron spectrometer package consisting of 36 Bubble Detectors that have been specifically formulated with six different energy thresholds.

Learn more


RC-18 – Recompression Chamber for BDS

To recompress (re-zero) the bubbles in the BDS after an exposure, a hydrostatic pressure chamber is available.  18 BDS, in a plastic holder, are placed in the RC-18 and the chamber is filled with water.  Pressure is applied safely and easily with a screw down piston assembly.  18 BDS can be recompressed at one time in the RC-18, with recompression time in the order of 30 minutes.

Learn more


BDR-III – Bubble Detector Reader III

The Bubble Technology Industries BDR-III automatic reader was specially designed for fast and accurate analysis of the complete range of patented neutron bubble detectors. The BDR-III reader is the instrument of choice for users who process intermediate or large numbers of bubble detectors as part of their dosimetry program.

Learn more

Calibration Detector

BDR-III Calibration Detector

The BDR-III provides bar code-ready, fully automated counting with machine vision technology that generates database compatible files in a compact, simple-to-use instrument. To allow the user to verify the proper operation of the BDR-III, a calibration detector is provided with each reader. Additional calibration detectors can be purchased separately for the BDR-III reader as required. 

Learn more

Calibration Services

Survey Meter Calibration

BTI has licensed facilities to support survey meter calibration and verification of calibration in accordance with CNSC regulations.

Learn more

Leak Testing

Sealed Source Leak Testing

The main purpose of sealed source leak testing is to determine, qualitatively, the integrity of a sealed source capsule for leakage. All sealed source leak testing is performed in accordance …

Learn more

Sealed Barrel

Sealed Source Disposal

BTI can provide clients with expert assistance in sealed source disposal. BTI has extensive experience in the transport and handling of Class 7 dangerous goods (DG) and has a CNSC-licenced …

Learn more

Business Meeting

CNSC Licence Application & Support

In Canada, the possession and use of nuclear substances and radiation devices are regulated by the Canadian Nuclear Safety Commission (CNSC) in accordance with the Nuclear Safety and Control Act …

Learn more

Custom Product

Custom Products

BTI regularly provides custom radiation, explosives, and contraband detection products for our clients’ special applications. Please contact us at to discuss your requirements.

Learn more