Microspec-6
BTI’s MICROSPEC-6™ is a powerful, portable spectroscopic survey system for the detection, identification, and measurement of ionizing radiation.
Learn moreBTI develops custom products and conducts innovative research and development, often in collaboration with research and academic institutes. National research labs and universities around the world frequently rely upon BTI to provide custom systems and components, due to our ability to rapidly and cost-effectively deliver unique radiation detection instrumentation. If you do not see a suitable product/service below, please contact us to discuss your specific needs.
BTI’s MICROSPEC-6™ is a powerful, portable spectroscopic survey system for the detection, identification, and measurement of ionizing radiation.
Learn moreBubble Technology Industries has developed a spectroscopic mobile system that can be easily mounted on any vehicle platform. This system (called the “MOBILE MICROSPEC”) is ideally suited for mobile platforms.
Learn moreBubble Technology Industries N-PROBE is a revolutionary portable neutron scintillation spectrometer, designed to be used by non-specialists for measurement of low-intensity neutron doses in the mixed field environments often found in nuclear utilities, fuel storage areas, fuel and waste processing operations and military applications.
Learn moreIn the MICROSPEC system, NaI response functions and efficiencies are stored in the on-board computer. The acquired spectrum is stripped and used to calculate dose equivalent using internationally accepted energy-dose conversion coefficients. The result is a NaI-based system that provides highly accurate, energy-independent, tissue equivalent dose.
Learn moreThe MICROSPEC X-Ray Probe was developed to perform spectral and dose-equivalent measurements for low-energy photons for assessment of radiological hazards for the skin Hp(0.07) and eye Hp(3). The MICROSPEC X-Ray Probe uses a thin NaI crystal, which has low detection efficiency for high-energy gamma rays and high detection efficiency for low-energy gamma rays.
Learn moreBubble Technology Industries’ MICROSPEC systems were the first truly portable spectroscopic instruments providing the two essential pieces of information required by health physicists – dose rate and radionuclide identification. In addition to an extensive line of photon probes, BTI offers the only commercially available portable beta spectrometer, the B-PROBE™.
Learn moreThe Simple Scintillation Spectrometer (SSS) is a research neutron spectrometer intended to complement the range of ROSPECTM by allowing measurements from 4 to 16 MeV.
Learn moreMICROSPEC calibration caps are used for automatic energy calibration in BTI’s MOBILE MICROSPEC and MICROSPEC-6 spectroscopic probe systems. An appropriate cap must be purchased separately for each probe purchased.
Learn moreROSPEC is a user friendly, unique rotating neutron spectrometer designed specifically for the spectral measurement of degraded fission neutrons, which may be encountered in nuclear power and fuel processing plants, weapons-related military facilities and accelerator laboratories. ROSPEC is intended for use by non-specialists for the characterization of neutron fields that pose a health threat.
Learn moreThe BTI FNS-100 is a high efficiency, high resolution fast neutron spectrometer. The detector is a multi-wire He-3 ion chamber with a dense quenching gas. The availability of both high efficiency and exceptional resolution in one instrument makes the FNS-100 useful for nuclear science and engineering, materials research and radiation protection.
Learn moreBubble Detectors are the most sensitive, accurate, neutron dosimeters available. Used for over 15 years by nuclear facilities, research institutes, military personnel, and the medical community, Bubble Detectors provide instant visible detection and measurement of neutron dose. The BD-PND is the recommended detector for personal neutron dosimetry.
Learn moreThe Bubble Detector is the only neutron dosimeter where the response is independent of dose rate and energy, with zero sensitivity to gamma radiation. Health physicists and others who are especially concerned with thermal neutron dose can take advantage of the simplicity and low cost of thermal Bubble Detectors. The BDT Bubble Detector is preferentially sensitive to thermalized neutrons, with an exclusion ratio of thermal-to-fast neutron response exceeding 10:1.
Learn moreBubble Detectors are the most sensitive, accurate, neutron dosimeters available. Used for over 15 years by nuclear facilities, research institutes, military personnel, and the medical community. The BDS is a complete low-cost neutron spectrometer package consisting of 36 Bubble Detectors that have been specifically formulated with six different energy thresholds.
Learn moreTo recompress (re-zero) the bubbles in the BDS after an exposure, a hydrostatic pressure chamber is available. 18 BDS, in a plastic holder, are placed in the RC-18 and the chamber is filled with water. Pressure is applied safely and easily with a screw down piston assembly. 18 BDS can be recompressed at one time in the RC-18, with recompression time in the order of 30 minutes.
Learn moreThe Bubble Technology Industries BDR-III automatic reader was specially designed for fast and accurate analysis of the complete range of patented neutron bubble detectors. The BDR-III reader is the instrument of choice for users who process intermediate or large numbers of bubble detectors as part of their dosimetry program.
Learn moreThe BDR-III provides bar code-ready, fully automated counting with machine vision technology that generates database compatible files in a compact, simple-to-use instrument. To allow the user to verify the proper operation of the BDR-III, a calibration detector is provided with each reader. Additional calibration detectors can be purchased separately for the BDR-III reader as required.
Learn moreBTI has licensed facilities to support survey meter calibration and verification of calibration in accordance with CNSC regulations.
Learn moreThe main purpose of sealed source leak testing is to determine, qualitatively, the integrity of a sealed source capsule for leakage. All sealed source leak testing is performed in accordance …
Learn moreBTI can provide clients with expert assistance in sealed source disposal. BTI has extensive experience in the transport and handling of Class 7 dangerous goods (DG) and has a CNSC-licenced …
Learn moreIn Canada, the possession and use of nuclear substances and radiation devices are regulated by the Canadian Nuclear Safety Commission (CNSC) in accordance with the Nuclear Safety and Control Act …
Learn moreBTI regularly provides custom radiation, explosives, and contraband detection products for our clients’ special applications. Please contact us at sales@bubbletech.ca to discuss your requirements.
Learn more